Lead-free Brass Rods
The eB series consists of lead-free brass rods that do not contain any substances of concern such as lead or cadmium.
Product lineup and model numbers
| In-house Standard (Product name) |
JIS Standard | In-house Standard |
|---|---|---|
| Low-cadmium, lead-free brass rod | JIS Standard does not apply. | eB-FC |
| JIS Standard does not apply. | eB-HC | |
| – | eB-02 |
| In-house Standard (Product name) |
Low-cadmium, lead-free brass rod |
| JIS Standard | JIS Standard does not apply. |
| In-house Standard | eB-FC |
| In-house Standard (Product name) |
Low-cadmium, lead-free brass rod |
| JIS Standard | JIS Standard does not apply. |
| In-house Standard | eB-HC |
| In-house Standard (Product name) |
Low-cadmium, lead-free brass rod |
| JIS Standard | – |
| In-house Standard | eB-02 |
Features and applications
| In-house Standard | Applications | Details |
|---|---|---|
| eB-FC | For cutting and caulking. Substitute for C3603 and C3604 |
eB-FC is a bismuth-based, lead-free, low-cadmium free-cutting brass rod that sets a global standard for next-generation brass rod quality. It has a high level of well-balanced machinability between cutting, forging and caulking. Its high thermal and electric conductivity makes it suitable for electrical appliance and electronic device parts as well as automobile parts. |
| eB-HC | For cutting and forging. Substitute for C3604, C3771, and C3531 |
eB-HC meets the lead-content requirements of AB1953 (California’s Health and Safety Code Section 116875) and those of the NSF (National Sanitation Foundation) /ANSI (American National Standards Institute) Standard 61. This is a lead-free, low-cadmium brass rod that features high resistance to wear and dezincification. (Maximum depth of erosion / corrosion: less than 70 μm) |
| eB-02 | For cutting Substitute for C3604 Complies with EN standard CW510L |
eB02 is a low-lead, free-cutting brass rod that features recyclability and machinability. This product contains not more than 0.2% of lead and can be used as a substitute for JIS C3603 and C3604 (complies with EN standard CW510L.) |
| In-house Standard | eB-FC |
| Applications | For cutting and caulking. Substitute for C3603 and C3604 |
| Details | eB-FC is a bismuth-based, lead-free, low-cadmium free-cutting brass rod that sets a global standard for next-generation brass rod quality. It has a high level of well-balanced machinability between cutting, forging and caulking. Its high thermal and electric conductivity makes it suitable for electrical appliance and electronic device parts as well as automobile parts. |
| In-house Standard | eB-HC |
| Applications | For cutting and forging. Substitute for C3604, C3771, and C3531 |
| Details | eB-HC meets the lead-content requirements of AB1953 (California’s Health and Safety Code Section 116875) and those of the NSF (National Sanitation Foundation) /ANSI (American National Standards Institute) Standard 61. This is a lead-free, low-cadmium brass rod that features high resistance to wear and dezincification. (Maximum depth of erosion / corrosion: less than 70 μm) |
| In-house Standard | eB-02 |
| Applications | For cutting Substitute for C3604 Complies with EN standard CW510L |
| Details | eB02 is a low-lead, free-cutting brass rod that features recyclability and machinability. This product contains not more than 0.2% of lead and can be used as a substitute for JIS C3603 and C3604 (complies with EN standard CW510L.) |
